Description:

2801M Spy Remote Converstation Voice Activated wiretap Wireless

This unit allows you spy listen to any remote conversation via your cell phone! Just buy a sim-card (e.g. from AT&T or Tmobile) and put into this gadget, and then put it secretly into someone's bags or office. Then you can remotely control this wiretap by sending it SMS messages. You can turn the microphone on or off.   The gadget is also voice-activated to save power.

Features

• USE GSM 900/1800/1900 cell phone technology
• Remote turn on/off microphone
• Remotely hear the voice conversation
• Voice-actived control
• Easy operation
• 
  

  Operation instructions:

Operation Instruction
Phone contact operation:
A. Use text message (SMS Message), send XXX01 and Cell phone number
XXX= the Three Past word codes of the main body( each unit have different secret code( or Identification number), it is on the back of the unit, )
01= the first preset cell phone number
phone number = the cell phone number which you need to preset


For example: 936010912345678 send out. Then the main body will receive and save the phone number 0912345678 to the first number in the contact of the SIM card in this unit. And the SIM card will reply one message: “0912345678” ?1”OK... When receive this message indicates that you have presented the first phone number successfully.
B. the second phone number: XXX02phone number For example: 936020912999888
0912999888 will be saved as the second phone number in the SIM card and it will reply a message as:0912999888
C. the third phone number: XXX03phone number For example: 936020912777888
0912777888 will be saved as the third phone number in the SIM card and it will reply a message as 091277788
Other text message command:

1. XXX041 = turn on the MIC..it will reply message: MIC=ON

2. XXX040 = turn off the MIC.it will reply message: MIC=OFF

3. XXX060 =Adjust the sensitivity to be the lowest 0,.it will reply message: MIC=0

4. XXX061 =Adjust the sensitivity to be 1 ...it will reply message: MIC=1

5. XXX062 = Adjust the sensitivity to be 2 ..it will reply message: MIC=2

6. XXX063 = Adjust the sensitivity to be the highest 3..it will reply message: MIC=3

After turn on the main body, the light will be on (if not, please wait ten seconds);
If the light is lighted on, it indicates that it is searching for the signal or there is no SIM card inside. The green led will be flashed once every three or four seconds.
The light will be on which indicates that the voice around is louder or loud as the preset value (after It flashes two seconds, it will begin scan the voice again)
XXX041 Turn on the MIC, when it received the louder voice or loud as the preset value, it waits another five seconds to scan the voice again. If it can not receive the second voice within fifteen seconds, it will not receive the second voice, and it will just receive the first voice again. And then if it will receive the voice again within fifteen seconds, it will send the message and call the first phone number.